Radiator Coolant

Radiator Coolant, also known as antifreeze, is a fluid used in vehicles and machinery to regulate the temperature of the engine and prevent it from overheating or freezing. It circulates through the engine's cooling system, absorbing heat and dissipating it through the radiator. Radiator coolant also helps protect against corrosion, scale buildup, and freezing in cold weather. Typically made from a mixture of ethylene glycol or propylene glycol and water, it ensures the engine operates within an optimal temperature range, enhancing performance and preventing damage.

Mastercool-88 Oat

Mastercool-88 uses Organic Additive Technology (OAT), with Carboxylate content that tends not to erode. This technology provides excellent protection for components in the cooling system, including aluminum which is widely used in modern engines. Unlike conventional coolants, Mastercoo-88 does not require the routine addition of SCA (Supplement Coolant Additive) for optimal protection of the cooling system. Save more costs and time. With non-toxic content, and easy to decompose Mastercool-88 is safe for the environment and humans.

Superior Protection, No More Worry about Corrosion Problems

With OAT (Organic Additive Technology), Mastercool-88 always protects the cooling system from corrosion even in the most severe conditions. Effectively protects aluminum, iron, brass, steel, cast iron, copper, and other metals used in the cooling system.

Longer Service Life, Up to 12,000 hours Total Cost Savings

No more short-term coolant replacements that will cost a lot of money. Mastercool-88 has a service life of up to 6,000 - 12,000 hours, much longer than conventional coolants which are only up to 4,000 hours.

SAFE & BIODEGRADABLE, Environmentally Friendly, Safe for Humans and Easily Degradable.

Environmental awareness is the most important part of life today. Mastercool-88 is environmentally friendly and biodegradable. This product is harmless to humans, does not contain toxic and carcinogenic materials.

Storage and Expiration

During Storage, make sure the container is tightly closed. The expiry date of this product is 2 years. The Expiry Date is mentioned on the label.

Without Additive SCA, No SCA (Supplemental Coolant Additive) Required

Unlike conventional coolants that always require SCA to be added during regular service schedules, Mastercool-88 uses OAT technology that does not require SCA to be added, thus saving more costs and time.

No Water Mixing, Ready to Use Performance Guaranteed

Water is the most important component in Radiator Coolant, low water quality will cause problems in the cooling system, such as corrosion and water scale. Mastercool-88 is formulated ready to use, using high quality demin water ensures optimal performance.

Start Your Journey with Us

Contact PT. Dongsuh Indonesia today for a free consultation and discover how help can help your business

Mastercool – 88

Description

MasterCool -88 is ready-to-use radiator coolant for heavy duty engine cooling system where antifreeze is not required. MasterCool-88 consists of Organic Acid Technology (OAT) corrosion inhibitors, scaling and fouling controller for closed cooling systems.
Benefit :

• Organic Additive Technology (OAT);

• Ready to use;

• Environmental Friendly;

• Waterbase Engine Coolant;

• NAPS Free;

• Safe for All Material on Cooling System.

Usage interval : 6.000 Hours

Packing :

• 1.000 Kg/Tote Tank

• 20.000 Flexi Bag

Note :

Storage & Shelf Life During storage, keep container tightly sealed. The self life of this product is 2 years.

Master Cool – PG

Description

MasterCool -PG is ready-to-use radiator coolant for heavy duty engine cooling system That include Anti-Freeze. MasterCool-PG consists of Organic Acid Technology (OAT) and Propylene Glycol, Corrosion inhibitors, scaling and fouling controller for closed cooling systems.

Benefit :

• Organic Additive Technology (OAT);

• Antifreeze;

• Ready to use;

• Environmental Friendly;

• Waterbase Engine Coolant;

• NAPS Free;

• Safe for All Material on Cooling System.

Usage interval : 12.000 Hours

Packing :

• 1.000 Kg/Tote Tank

• 20.000 Flexi Bag

Note :

Storage & Shelf Life During storage, keep container tightly sealed. The self life of this product is 2 years.

Master Flush – 309

Description

Masterflush 309 is Flush removes rust and scale from the whole cooling system and radiator. Masterflush 309 Flush reaches all those hard to clean areas with in the cooling system. Masterflush 309 Flush restores cooling efficiency and performance. Masterflush 309 Flush will clean all water channels with out having any negative effect on hoses or aluminium.

Benefit :

• Removes Scale and Rust;

• Cleaned radiator of dirt and grime;

• Conditions radiator for new coolant;

• Helps to prevent rust formation.

Usage interval : 12.000 Hours

Packing :

• 25 Kg/ Bag

Note :

Directions for use: Always shake the bottle well before use. Add the contents of the Masterflush 309 to the coolant reservoir. Run the engine with the heater on hot and the engine at fast idle for 10-15 minutes. After the desired time period drain and flush the existing coolant and clean with fresh water. Once cleaned with fresh water, drain the water and replace with new specified coolant.

Specialty Chemicals

We provide high-performance Specialty Chemicals tailored to meet the unique needs of various industries. Our products include advanced radiator coolants, powerful degreasers, and effective carbon removers, designed to enhance efficiency and ensure optimal performance. Serving sectors such as oil and gas, coal mining, mineral mining, palm oil, power plants, marine, and manufacturing, we are committed to delivering solutions that meet the highest industry standards.

Carbon Remover

CarbMaster 222 is a liquid for alkaline CIP processing in the Food & Beverages Industry. CarbMaster 222 also a powerful water base carbon remover which will also remove varnish, oil and sludge from metal surfaces.

Benefit

• CarbMaster 222 is water base. It is sweet smelling and does not have strong solvent odors.

• Besides being a carbon remover, CarbMaster 222 will also remove other contaminants such as grease/oil, sludge, paint, varnish or glue.

• Possible to applicate in any automatic machine parts washer such as Apollo Wash or Magnus Hot deep tank.

• CarbMaster 222 will remove carbon deposit from diesel engine block, carburetors, combustion valve, flanges and piston.

• No flash point and non toxic.

Technical Data

• Appearance : Clear yellow to clear brown liquid

• Odor : Product Specific

• Specific Gravity : 1.15 ± 0.03

• pH : > 12

• Solubility in water : Soluble

• Flash Point : Not Applicable

Water-based Cleaner

Cleanmaster 800 is a water-based general purposes cleaner formulation designed to perform well for oil and grease removal in demanding applications in the general engineering, automotive and mining or construction industries.

Benefit

• Ready to use

  Cleanmaster 800 is ready and easy to use. There is no need for prior dilution

• Environmentally friendly product

  It is water based and biodegradable, containing no caustic alkali.

• Reduced safety concern

  Cleanmaster 800 is safe to use and is not irritant to the skin. Being water based cleaner, clenmaster 800 is a particularly effective safety degreaser especially when used indoors or in confined spaces.

• Excellent Cleaning Performance

  Cleanmaster 800 provides instant cleaning action. This product is highly effective on a wide range of dirty, oil and grease in both hard and soft water.

Technical Data

• Appreance : Blue Liquid

• Odor : Aloe Vera

• Specific Gravity : 1.00 ± 0.05

• pH : 8-10

• Foam : Low Foaming

• Solobility in Water : Soluble